Here's the comparison of the two carrier boards for Jetson AGX Xavier, based on our catalog:
| Spec | AVerMedia AG411 | Connect Tech Rogue (AGX101 / AGX111) |
|---|---|---|
| M.2 slots | 4 total: 3x M-key 2280 + 1x E-key 2230 | 3 total: 2x M-key + 1x E-key |
| USB ports | 6 | 4 (including 3x USB 3.1 Type-C) |
| Min. operating temp | -20 °C | -40 °C |
| Max. operating temp | 85 °C | 85 °C |
avermedia... +5avermedia.com ↗“io.m2_slots=M-key 2280, M-key 2280, M-key 2280, E-key 2230, io.usb_ports=6”avermedia.com ↗“thermal.min_operating_temp_c=-20 °C”connecttech.com ↗“two NVMe M.2 Key M slots, 3x USB 3.1 Type-C”connecttech.com ↗“io.m2_slots=M-key, M-key, E-key, io.usb_ports=4”connecttech.com ↗“thermal.min_operating_temp_c=-40 °C”connecttech.com ↗“rated -40 to +85 C”
Summary of the differences:
- M.2 slots: The AG411 offers 4 M.2 slots (three M-key 2280 plus one E-key 2230), while the Rogue provides 3 slots (two M-key plus one E-key). avermedia... +1avermedia.com ↗“M-key 2280, M-key 2280, M-key 2280, E-key 2230”connecttech.com ↗“M-key, M-key, E-key”
- USB ports: The AG411 has 6 USB ports, versus 4 on the Rogue, 3 of which are USB 3.1 Type-C. avermedia... +1avermedia.com ↗“io.usb_ports=6”connecttech.com ↗“3x USB 3.1 Type-C”
- Minimum operating temperature: The Rogue is rated down to -40 °C, which is 20 °C colder than the AG411's -20 °C limit. connecttec... +1connecttech.com ↗“rated -40 to +85 C”avermedia.com ↗“-20 to 85 °C”
A few other notes that may matter for your decision: the AG411 supports both the AGX Xavier and AGX Xavier Industrial modules and accepts a wider power input range (12–54 V), while the Rogue is listed for the Jetson AGX Xavier family and takes 9–19 V DC. The Rogue also adds Wi-Fi/BT connectivity and supports a broad range of JetPack versions up to 5.1.5; the AG411's listed JetPack support is 4.6. avermedia... +4avermedia.com ↗“power.power_input=12-54 V”connecttech.com ↗“Wide Input 9-19V DC”connecttech.com ↗“connectivity.wifi_bt=True”connecttech.com ↗“jetpack_version_support=5.1.5”avermedia.com ↗“jetpack_version_support=4.6”