Both kits are built on NVIDIA Jetson Orin Nano hardware, but they differ in which performance figure their manufacturers publish and in how specifically their JetPack support is documented. Here's the comparison:
Fictionlab Leo Pack vs RoboRacer Core Kit
| Fictionlab Leo Pack (Leo Rover Vision Pack) | RoboRacer Core Kit | |
|---|---|---|
| Jetson module | NVIDIA Jetson Orin Nano | NVIDIA Jetson Orin Nano Super |
| AI performance | 40 TOPS (INT8, default mode) | 67 TOPS (INT8 sparse, Super mode) |
| Supported JetPack | JetPack 6.2.1 (L4T >= 36.4.0) | NVIDIA JetPack (Ubuntu 22.04 LTS) — no specific version listed |
| ROS support | ROS 2 | ROS 2 Humble |
AI performance
The two figures aren't directly comparable as stated, because they're quoted in different modes:
- The Leo Pack is listed with a 40 TOPS AI performance figure on the standard (non-Super) Jetson Orin Nano. Its manufacturer does not publish a Super-mode figure in the catalog, so I can't state one for it.
- The RoboRacer Core Kit uses the Jetson Orin Nano Super and is listed at 67 TOPS, with the figure explicitly noted as INT8 sparse in Super mode. No default-mode figure is listed for it in the catalog.
JetPack support
- The Leo Pack explicitly supports JetPack 6.2.1 (L4T >= 36.4.0).
- The RoboRacer Core Kit is listed as running NVIDIA JetPack with Ubuntu 22.04 LTS, but a specific JetPack version is not listed in the catalog — you'd want to confirm the exact supported version with Ambimat Electronics if that matters for your setup.
For reference: Leo Pack product page and RoboRacer Core Kit product page.