I searched our camera kit catalog for global shutter kits supporting Jetson Thor, and I have to be straight with you: I couldn't find a global shutter camera kit of 12 MP or more for Jetson Thor. The resolution requirement couldn't be applied as a catalog filter, so I verified each match manually against its listed resolution — none of the four Jetson Thor-compatible global shutter kits reaches 12 MP.
The closest options, all clearly below your 12 MP requirement:
| Product | Sensor | Resolution (listed) | Interface | Jetson Thor support |
|---|---|---|---|---|
| e-CAM56_CUHSB_CHLC_1H02R1 | IMX568 | 2472 × 2064 (~5 MP) | 10G HSB | Yes |
| NileCAM56_CUOAGX | IMX568 | 2472 × 2064 (~5 MP) | GMSL2 | Yes |
| e-CAM37_CUHSB_CHLC_1H02R1 | IMX900 | 2064 × 1552 (~3 MP) | 10G HSB | Yes |
| e-CAM25_CUHSB_CHLC_1H02R1 | AR0234 | 1920 × 1200 (~2.3 MP) | 10G HSB | Yes |
The two IMX568-based kits are the highest-resolution global shutter kits I can verify for Jetson Thor, at roughly 5 MP — less than half your target. All four also list Jetson AGX Orin support. The three 10G HSB kits are Holoscan imaging kits combining the camera module, adapter, sensor bridge, and Ethernet cable; the NileCAM56 connects over GMSL2.
If 12 MP is a hard requirement, you'd likely need to check with these vendors (all e-con Systems products here) or a Physical AI representative for anything not yet reflected in our catalog. Otherwise, if a ~5 MP global shutter sensor would work for your application, the e-CAM56 (10G HSB) and NileCAM56 (GMSL2) are your best starting points, depending on which interface your Thor setup uses.