Short answer: no — none of the Vision Accelerator & Interface Cards in our catalog support Jetson Thor today. I checked all six cards in that category, and their supported Jetson module families top out at Orin-generation modules (Xavier NX, Orin NX, AGX Xavier, AGX Orin, AGX Orin Industrial) — none lists Jetson Thor. neousys-te...neousys-tech.com ↗“Vision acceleration, frame capture, and camera interface cards for Jetson”
Here are the six interface/vision accelerator cards and what they actually support, so you can see the gap:
| Card | Manufacturer | Supported Jetson module(s) |
|---|---|---|
| PCIe-GL26 | Neousys | Jetson Xavier NX 8GB/16GB |
| PCIe-NX154PoE | Neousys | Jetson Orin NX 8GB/16GB |
| PCIe-NX156U3 | Neousys | Jetson Orin NX 8GB/16GB |
| LIPSedge F110 AGX-Xavier | LIPS | Jetson AGX Xavier |
| DesignCore Jetson AGX Orin FPD-Link III Interface Card | D3 Embedded | Jetson AGX Orin / AGX Orin Industrial dev kits |
| DesignCore Jetson AGX Orin GMSL2 Interface Card | D3 Embedded | Jetson AGX Orin / AGX Orin Industrial dev kits |
neousys-te... +5neousys-tech.com ↗“compatibility.jetson_module=Jetson Xavier NX 8GB, Jetson Xavier NX 16GB”neousys-tech.com ↗“compatibility.jetson_module=Jetson Orin NX 8GB, Jetson Orin NX 16GB”neousys-tech.com ↗“compatibility.jetson_module=Jetson Orin NX 8GB, Jetson Orin NX 16GB”lips-hci.com ↗“compatibility.supported_jetson_families=Jetson AGX Xavier”d3embedded.com ↗“marketplace.supported_products=AGX Orin, AGX Orin Industrial”d3embedded.com ↗“marketplace.supported_products=AGX Orin, AGX Orin Industrial”
Closest Thor-compatible vision products I did find
While no Thor interface card exists in that category, there are Jetson Thor-compatible vision products elsewhere in the catalog — mainly camera kits built around the Holoscan Sensor Bridge and one NVR system. These are not PCIe interface/accelerator cards, so I'm presenting them as the nearest verified alternatives, not as answers to your question:
- e-con Systems Holoscan imaging kits (e-CAM31, e-CAM25, e-CAM37, e-CAM56, e-CAM85, e-CAM200 with CHLC adapters) — camera modules with adapters and sensor bridges connecting over 10G HSB, listed for both Jetson AGX Orin and Jetson Thor. e-consyste... +1e-consystems.com ↗“compatibility.supported_jetson_families=Jetson AGX Orin, Jetson Thor”e-consystems.com ↗“compatibility.supported_jetson_families=Jetson AGX Orin, Jetson Thor”
- e-con Systems MIPI CSI-2 and GMSL camera kits (e-CAM80_CUOAGX, e-CAM130_CUOAGX, e-CAM85_CUOAGX, NileCAM80_CUOAGX, NileCAM56_CUOAGX) — listed for Jetson AGX Orin, Jetson AGX Xavier, and Jetson Thor. e-consyste...e-consystems.com ↗“compatibility.supported_jetson_families=Jetson AGX Orin, Jetson Thor, Jetson AGX Xavier”
- Leetop Camera for Holoscan Sensor Bridge — a camera module for the Jetson Thor Holoscan Sensor Bridge for ultra-low-latency sensor-to-inference. leetopgrou...leetopgroup.com ↗“Camera module for Jetson Thor Holoscan Sensor Bridge; ultra-low-latency sensor-to-inference”
- YUAN EDG6N0-S T5X NVR — a full NVR/video analytics system built on Jetson Thor modules (T5000 128GB / T4000 64GB), with eight PoE camera ports and up to 2070 FP4 TFLOPS. yuan.com.twyuan.com.tw ↗“YUAN Jetson Thor NVR system supporting T5000/128GB and T4000/64GB configurations”
What I could not determine
I could not verify any PCIe vision accelerator or camera interface card (frame grabber, GMSL/FPD-Link deserializer card, etc.) with Jetson Thor support in the catalog — that specific combination is not listed. Whether a Thor-compatible interface card is in development is something I have no evidence for either way; a partner or NVIDIA representative would be the right channel for roadmap questions.