select.parts
Selection

Smart cameras accepting the highest input voltage for a 48 V vehicle rail

Asked as: “Our vehicles run a 48 V rail. Which smart camera accepts the highest input voltage?”

Answered by the Rapidflare agent

The EverFocus SNC-8DFR is the smart camera that accepts the highest input voltage: 9–54 V DC. everfocus...everfocus.com ↗“PoE++ / DC 9V~54V”

Among the smart cameras whose power input range includes 48 V, here is the full picture:

ProductPower inputNotes
SNC-8DFR (EverFocus)9–54 V DC (or PoE++)Covers your 48 V rail with headroom up to 54 V
SNA-Series (EverFocus)9–48 V DC (or PoE++)Covers your 48 V rail at the top of its range

The SNC-8DFR is a 8MP Sony IMX678 dome AI camera with Jetson Orin Nano (up to 67 TOPS Super mode), IP66/IK10, and an operating range of −20 to 50 °C. The SNA-Series is a bullet AI camera with Jetson Orin Nano/NX (up to 157 TOPS Super mode), also IP66/IK10, with 16 GB memory, WiFi/BT, 5G cellular, and GNSS/GPS. everfocus... +1everfocus.com ↗“8MP Sony IMX678 dome AI camera with Jetson Orin Nano”everfocus.com ↗“Preliminary bullet AI camera with Jetson Orin Nano/NX”

Both cameras are listed as preliminary products and also support PoE++ (IEEE 802.3bt) as an alternative power input. everfocus...everfocus.com ↗“GbE with IEEE 802.3bt (PoE++)”

One thing I could not determine: the catalog groups these under "Smart Cameras" — if you were looking for a smart camera in the in-vehicle category specifically (with automotive-grade certifications, for example), those certifications are not listed in the data I retrieved, and I did not find a vehicle-specific smart camera family. If your 48 V rail is nominal with transients above 54 V, neither camera would be verified to handle that; both are marked preliminary, so I'd confirm the exact input tolerance with EverFocus before deployment.

Sources

  1. SNC-8DFR everfocus.com
  2. SNA-Series everfocus.com