Four drone mission computers that support a Jetson Orin NX module weigh under 100 g:
| Product | Weight | Module Support | Notable Specs |
|---|---|---|---|
| Amovlab Allspark 2-CNX | 49 g | Orin NX 16GB / 8GB, Orin Nano, Xavier NX | 100 × 60 mm, 2 Ethernet ports, 3 USB ports, CAN bus, mPCIe + M.2, 2 MIPI camera inputs, 10–26 V input, −20 °C min operating temp amovlab.topamovlab.top ↗“mechanical.weight_g=49 g” |
| ARK Jetson PAB V3 (Carrier V3) | 66 g | Jetson Orin NX / Orin Nano | Pixhawk Autopilot Bus (PAB) carrier, 132 × 61 mm, 2 M.2 slots (E-key 2230, M-key 2242), 2 MIPI camera inputs, HDMI, NDAA compliant, US-built arkelectro...arkelectron.com ↗“mechanical.weight_g=66 g” |
| ARK Just A Jetson | 75 g | Jetson Orin NX / Orin Nano | 100 × 72 mm, direct battery input up to 75 V, built-in IMU, WiFi/Bluetooth, CAN bus, 2 M.2 slots, NDAA compliant, US-made arkelectro...arkelectron.com ↗“mechanical.weight_g=75 g” |
| ARK Jetson PAB Carrier (V1) | 80 g | Jetson Orin NX / Orin Nano | Pixhawk Autopilot Bus (PAB) carrier for use with any PAB flight controller (e.g. ARKV6X), 4 MIPI camera inputs, 5 USB ports, 2 M.2 slots, DisplayPort, NDAA compliant, US-built arkelectro...arkelectron.com ↗“mechanical.weight_g=80 g” |
All four are carrier boards, so the Orin NX module itself is purchased and mounted separately — the listed weights cover the board only, not the module. If you want to pair one directly with a Pixhawk-standard flight controller over the PAB standard, the two ARK PAB carriers are the purpose-built options among these.