I found four Seeed Studio carrier boards that support the Jetson Orin Nano. All four also support the Jetson Orin NX.
Seeed Studio carrier boards for Jetson Orin Nano seeedstudi... +3seeedstudio.com ↗“HDMI 2.1, 2x CSI, GbE, 4x USB 3.2, M.2 M/E-Key, CAN, 40-pin, 9-19V)”seeedstudio.com ↗“Carrier board for Jetson Orin NX 16/8GB and Orin Nano 8/4GB (Super mode, up to 157 TOPS) with 2x GbE, 4x USB 3.2, HDMI, 4x CSI, M.2 M/E, mini-PCIe, 12-19V”seeedstudio.com ↗“Robotics carrier board for Jetson Orin Nano/Orin NX with 2x GbE, 6x USB 3.2 Type-A, USB-C DP 1.4, 5x CAN, M.2 M/E/B-key, GMSL2 expansion header, 19-54V”seeedstudio.com ↗“Compact 87x52mm carrier board for Jetson Orin NX/Orin Nano with HDMI, GbE, 2x USB 3.0, M.2 Key M 2242 NVMe, M.2 Key E, 1x CSI, CAN, 9-20V DC, -25 to 65C”
| Board | Ethernet | USB ports | MIPI CSI cameras | M.2 slots | CAN | Power input | What stands out |
|---|---|---|---|---|---|---|---|
| reComputer J401 | 1x GbE | 5 | 2 | M-key, E-key | 1 | 9–19 V | General-purpose board with HDMI 2.1 and a 40-pin header |
| reComputer Super J401 Carrier Board | 2x GbE | 5 | 4 | M-key 2280, E-key, plus mini-PCIe | 1 | 12–19 V | Supports Super mode, Wi-Fi/BT, 4G/LTE |
| reComputer Robotics J401 Carrier Board | 2x GbE | 8 | Not listed | M-key 2280, E-key, B-key | 5 | 19–54 V | Built for robotics: GMSL2 expansion header, USB-C DP 1.4, 5G |
| A603 Carrier Board | 1x GbE | 3 | 1 | M-key 2242, E-key 2230 | 1 | 9–20 V | Small 87x52 mm board rated for −25 to 65 °C |
Super mode: The reComputer Super J401 is the only one of these four that Seeed says supports Super mode. Its listing says "up to 157 TOPS", which is the Orin NX 16GB figure. Super mode on an Orin Nano gives less than that. The other three boards don't list a Super-mode figure. That doesn't mean they're slower hardware. Seeed simply doesn't state a Super figure for them. seeedstudi...seeedstudio.com ↗“Super mode, up to 157 TOPS”
How to choose:
- Cameras: The Super J401 has the most MIPI CSI inputs (4). seeedstudi...seeedstudio.com ↗“io.mipi_cameras=4”
- Robots or high-voltage power: The Robotics J401 has 5 CAN ports and accepts 19–54 V. seeedstudi...seeedstudio.com ↗“io.can_port_count=5”
- Small size or a wide temperature range: The A603 is rated for −25 to 65 °C. seeedstudi...seeedstudio.com ↗“thermal.max_operating_temp_c=65 °C”