Nine drone mission computers in our catalog support the Jetson Orin Nano:
| Product | Orin Nano variants supported | Weight | Power input | Key notes |
|---|---|---|---|---|
| Lambortech RMC-604 | Orin Nano 8GB | — | 10–60 V | 3S–14S battery input, 2× GMSL-2 cameras, -25 to 50 °C |
| Amovlab Allspark 2-CNX | Orin Nano 8GB | 49 g | 10–26 V | 100×60 mm carrier, 2 MIPI cameras, CAN |
| ARK Just A Jetson | Orin Nano | 75 g | 5.5–75 V | Built-in IMU, direct battery input, NDAA-compliant |
| Lambortech ECM004 | Orin Nano Super 8GB/4GB | — | 12–36 V | Integrated FlightCore H7 flight controller for ArduPilot |
| Lambortech ECM003 | Orin Nano Super 8GB/4GB | — | 19 V | 90×55 mm, HDMI input and output |
| Holybro Pixhawk Jetson Baseboard | Orin Nano 4GB | 203.2 g | 7–21 V | Pixhawk Autopilot Bus carrier, pairs with PAB flight controller e.g. Pixhawk 6X |
| ARK Jetson PAB Carrier (V1) | Orin Nano | 80 g | 5 V, 4 A min | PAB carrier for any PAB flight controller e.g. ARKV6X, NDAA-compliant |
| ARK Jetson PAB V3 | Orin Nano | 66 g | 5 V, 4 A min | Lightest ARK PAB carrier, NDAA-compliant |
| SignalGeneriX LOTUS mission computer | Orin Nano | — | — | Low-power mission computer for LOTUS-program daughter drones |
The RMC-604 is a lightweight AI drone computer built on Orin NX 8GB/16GB or Orin Nano 8GB, with 10–60 VDC input for 3S–14S batteries and two GMSL-2 camera inputs. The Allspark 2-CNX is a 100×60 mm carrier board for Orin NX modules (also Orin Nano and Xavier NX) intended for UAV, robotics and onboard AI development. The ARK Just A Jetson is an NDAA-compliant, US-made carrier board for Orin NX/Nano modules with direct battery input up to 75 V and a built-in IMU. The Lambortech ECM004 combines an Orin NX / Orin Nano (Super) module with an integrated FlightCore H7 flight controller for ArduPilot-based UAVs. The ECM003 is a 90×55 mm UAV edge AI module for Orin NX / Orin Nano (Super) modules with HDMI input and output. The Holybro Pixhawk Jetson Baseboard is a Pixhawk Autopilot Bus carrier for Orin NX/Nano modules that pairs the Jetson with a PAB flight controller such as the Pixhawk 6X. The ARK Jetson PAB Carrier (V1) is usable with any PAB flight controller such as the ARKV6X, NDAA compliant and US-built. The ARK Jetson PAB V3 likewise pairs the Jetson with any PAB flight controller such as the ARKV6X. The SignalGeneriX LOTUS mission computer is a lightweight, low-power AI-enabled mission computer for the daughter drones of the European LOTUS program. lambortech... +8lambortech.com ↗“built on NVIDIA Jetson Orin NX (8GB/16GB) or Orin Nano 8GB”amovlab.top ↗“carrier board for NVIDIA Jetson Orin NX modules (also Orin Nano and Xavier NX)”arkelectron.com ↗“direct battery input up to 75 V and a built-in IMU”lambortech.com ↗“integrated FlightCore H7 flight controller for ArduPilot-based UAVs”lambortech.com ↗“90 x 55 mm UAV edge AI module”holybro.com ↗“pairs the Jetson with a PAB flight controller such as the Pixhawk 6X”arkelectron.com ↗“usable with any PAB flight controller such as the ARKV6X”arkelectron.com ↗“pairs the Jetson with any PAB flight controller such as the ARKV6X”signalgenerix.com ↗“Lightweight, low-power AI-enabled mission computer”
A few pointers for a small drone build:
- Weight: the Amovlab Allspark 2-CNX (49 g), ARK Jetson PAB V3 (66 g), and ARK Just A Jetson (75 g) are the lightest boards with a stated weight.
- Flight controller integration: the ECM004 has a flight controller built in; the Holybro and ARK PAB carriers use the Pixhawk Autopilot Bus so you can pair your own PAB-compatible autopilot (e.g. Pixhawk 6X, ARKV6X).
- Variant check: all nine support Orin Nano, but verify the exact variant — the Holybro baseboard lists Orin Nano 4GB, the RMC-604 lists Orin Nano 8GB, and the Lambortech ECM003/ECM004 list Orin Nano Super 8GB/4GB.